News
+ Blog

Coreless motors usually cost more because a conventional iron-supported armature is replaced by a precisely formed, bonded, self-supporting winding that is harder to manufacture.

Yes, a 12V brushless DC motor may run from a 9V supply, but that does not mean every 12V BLDC system will start, carry its intended load, or operate reliably at 9V.

A source-backed guide to motor architecture, KV, thrust, thermal limits and propulsion-system selection.

In many organizations of scale, three things can be observed at the same time: the numbers in the reports look better every year; meetings produce less disagreement every year; execution grows more polished every year. Meanwhile, the product is getting worse, customers are leaving, and the real problems are becoming harder and harder to say out loud.

Airflow and static pressure are not the same thing, and a blower picked on one when the job needed the other is a common reason a compact product tests well on the bench and disappoints in the field. Airflow, in CFM or m³/min, is the volume of air moved at a stated condition; the headline maximum is usually taken near free-air, with little in the way. Static pressure, in pascals or inches of water, is the push a blower still has once resistance builds. Vacuums, hair dryers, air pumps, and air knives all force air through filters, nozzles, and ducts. They need push, not just volume. So the figure that decides the outcome is neither peak CFM nor peak pressure. It is the point where the blower's pressure-flow (P-Q) curve crosses the resistance of your system. EURARI's high-speed brushless blowers run up to 130,000 rpm for exactly these pressure-limited jobs.